On this project the client required us to look at Lead Flashing on the Stone Chimney. The Stone Slate Roof was leaking water, there was staining on the internal gable wall.

Upon inspection by one of our roofing specialists we found that the back lead flashing was incorrectly made & install wrong. Our Roofers removed the lead flashing from the chimney and installed a new code 4 lead flashing.

Our Roofers made the new lead flashing’s on site. They Lead Welded the corners & top flashing.

Once all the leadwork was complete we re-fit the stone slates using aluminum peg. The stone ridge was bedded using a Lime Mortar. All our leadwork receives 2 coats of patanation oil.

Tags

Share

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print
Scroll to Top
Scroll to Top
This website uses cookies to improve your experience. We’ll assume you accept this policy as long as you are using this website – View Policy