On this project in Cheshire we under took maintenance work to this large private house. Areas to the rear, side & front required Lime Pointing.

Our Team of Restoration Specialist had to carefully remove the existing Lime Pointing Mortar from the 2mm Ashlar Stone Block. We applied a new Lime Mortar carefully taping the joints on the stonework.

The Lime Pointing work involved removing the existing Lime Mortar, this was done using a blade tool. Every care was take not to chip or mark the existing stone masonry. Once the existing Lime Mortar was remove we flushed the joint to remove all dust & debris. The joints was then left to dry.

Our Builders then applied a tape to the joints to prevent the Lime Mortar from staining the stone masonry. The masonry joints were then packed with a Lime Mortar, this was left till the following day before the tape was removed.

The works took 10 weeks to complete, with team of 4 specialists


Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print
Scroll to Top
This website uses cookies to improve your experience. We’ll assume you accept this policy as long as you are using this website – View Policy