On this project we applied a roof to a newly built extension and made vital repairs to the existing roof. The house extension was constructed to the same dimensions as the existing house. The original farmhouse has a stone slate pitched roof. The stone extension was constructed to the same roof-line as the existing farmhouse. The […]
This project involved lead welding a neoprene movement joint to a stone gutter on the church roof. Lead T-Pren expansion joints are specifically designed to overcome the problem of laying Lead-lined gutters where the building construction prevents the recommended drip detail being used. Recommended by the Lead Sheet Association where it is not possible to
On this project our roofers repaired a stone slate roof in Barley, Lancashire. Barley is situated around the bottom of Pendle Hill close to Clitheroe, Gisburn, Burnley, Nelson, Colne, Barrowford, Whalley & Chatburn. The property is a 1750 stone built attached listed building. We erected an access scaffold above a ground floor garage & also
This project involved the repair of a leaking slate roof in Burnley, Lancashire. The Stone Slate Roof on the Listed Farmhouse had been re-laid by a another contractor only 4 years ago. But due to poor workmanship the Stone Slate Roof was Leaking. Our roofing team are experienced in all areas of roofing, Stone Slating,
Lead Valley Repairs On this project in Skipton, Yorkshire we were asked to make Lead Valley Repairs, due to water ingress into the bedroom below. One of our specialist team members diagnosed the problem, as a split in the Lead Valley. Our Roofing team attended the property and discovered that the Lead Valley had
This listed building in Bolton-by Bowland had water ingress issues caused by then cement based pointing used. The problems with using a cement based mortar for pointing traditional sand stone buildings are that the cement mortars are hard and not flexible. As the listed building moves thermally during the winter and summer months the hard
